Telecom & Network

EPW30-48A network Refurbished Equipment

EPW30-48A-E Power Supply Rectifier Cisco Emerson Monitoring Module

Emerson EPW30-48A-Emonitoring module eight major product features

Emerson the EPMU01 monitor module 128 × 64 LCD display unit, six functional operation of key / English selection (8 × 4 characters), the user interface is simple and effective interface. Monitoring module panel can easily be removed and replaced.

Emerson M500D monitoring module power parameters
Operating voltage:-19V ~-60V (-19V ~-72V is not damaged)

Emerson M500D monitoring module
1,Emerson M500D monitoring module display and setting function
The monitoring module can display the operating parameters of the power system, operating status, alarm status, set parameters and control parameters.

2,Emerson M500D monitoring module automatic battery management functions
Monitoring module can be set by the user data (such as the charging current limiting values ​​are float switch current value, etc.) to adjust the battery charging, the charging current, and the implementation of various protection measures (such as the charging current limiting, float temperature compensation etc.).

3,Emerson M500D monitoring module control functions
Monitoring module can be issued based on the operational status of the system being monitored object corresponding action command. The monitoring module supports both automatic and manual battery management.

4,Emerson M500D monitoring module alarms and alarm processing
1, the main alarm monitoring module type
The monitoring module based on the data collected on the system failure sound and light alarm, and alarm recording to produce action, at the same time can be reported to the backstage host.
2, alarm recording function
3, sound and light alarms and alarm call-back

5,Using a variety of ways to communicate with the background
Monitoring module through the power system signal adapter plate RS232/MODEM communication interface and 8 alarm dry contact output is used to communicate with the background monitoring.
1, RS232 communication
2, MODEM and communication EEM-M
3, dry contact output mode

6,Backstage host module by monitoring the power system three remote functions
Telemetry functions: the the background host can get through the monitoring module system, real-time analog;
Function of telesignalling: the background host can get through the monitoring module system, real-time switch;
The remote control features: background host module switch / reset / regulator system to Equalize / Float / test conversion system control mode switching, alarm silencer functions.

7, Emerson M500D monitoring the corresponding output module dry contact alarm type can be set flexibly

8, Emerson the M500D monitor module the important operation set password protection
Default password of password level
User-Level 1
Engineer level 2